ACI GRADE 1 WRITTEN EXAM LATEST ACTUAL EXAM 200 QUESTIONS AND CORRECT DETAILED ANSWERS WITH RATIONALES (VERIFIED ANSWERS) |ALREADY GRADED A+
ACI GRADE 1 WRITTEN EXAM LATEST 2023-
2024 ACTUAL EXAM 200 QUESTIONS AND
CORRECT DETAILED ANSWERS WITH
RATIONALES (VERIFIED ANSWERS) |ALREADY
GRADED A+
T or F: After the final rodding, the sides of the slump mold should
should be tapped lightly with the tamping rod. - ANSWER- False
T or F: When raising the slump mold, it should not be rotated or twisted.
(C143/C143M - 15a, Slump of Hydraulic-Cement Concrete) -
ANSWER- True
How much time is allowed for lifting the slump mold? (C143/C143M -
15a, Slump of Hydraulic-Cement Concrete) - ANSWER- 5 +/- 2
seconds
The measurement for slump is made from the top of the mold to what
point is the concrete specimen? (C143/C143M - 15a, Slump of
Hydraulic-Cement Concrete) - ANSWER- The displaced original center
of the top surface of the specimen
The slump of the concrete is measured and reported to the nearest...
(C143/C143M - 15a, Slump of Hydraulic-Cement Concrete) -
ANSWER- 1/4 in (5 mm)
How much time is allowed to conduct the slump test from beginning to
completion? (C143/C143M - 15a, Slump of Hydraulic-Cement
Concrete) - ANSWER- 2.5 minutes
The diameter of the tamping rod used in the test method is _____.
(C138/C138M - 17a, Density (unit weight), yields, and air content
(gravimetric) of concrete) - ANSWER- 16 mm (5/8 in) +/- 2 mm (1/16
in)
What is the required shape of the tamping end of the rod? (C138/C138M
- 17a, Density (unit weight), yields, and air content (gravimetric) of
concrete) - ANSWER- Rounded to a hemispherical tip
What is the required minimum frequency of the vibratos used in this
testing method? (C138/C138M - 17a, Density (unit weight), yields, and
air content (gravimetric) of concrete) - ANSWER- 9000 vibrations per
min (150 hz)
The outside diameter or size dimension of the vibrating element must be
at least ___, but not greater than ___. (C138/C138M - 17a, Density (unit
weight), yields, and air content (gravimetric) of concrete) - ANSWER19 mm (0.75 in), 38 mm (1.50 in)
T or F: A plastic container can be used for the measure in this method.
(C138/C138M - 17a, Density (unit weight), yields, and air content
(gravimetric) of concrete) - ANSWER- False, measure must be steel or
other suitable metal
What is the minimum thickness of a metal striker-off plate?
(C138/C138M - 17a, Density (unit weight), yields, and air content
(gravimetric) of concrete) - ANSWER- 6 mm (1/4 in)
What is the minimum thickness for a glass or acrylic strike-off plate?
(C138/C138M - 17a, Density (unit weight), yields, and air content
(gravimetric) of concrete) - ANSWER- 12 mm (1/2 in)
What is the specific red weight of the mallet used on measures that are
14 L (0.5 ft3)? (C138/C138M - 17a, Density (unit weight), yields, and
air content (gravimetric) of concrete) - ANSWER- 600 +/- 200 g (1.25
+/- 0.50 lb)
Measures other than air meter bowls used for this test must conform to
ASTM _____. (C138/C138M - 17a, Density (unit weight), yields, and
air content (gravimetric) of concrete) - ANSWER- C29/C29M
Air meter bowls used for this test must conform to ASTM _____ and be
calibrated for volume according to ASTM _____. (C138/C138M - 17a,
Density (unit weight), yields, and air content (gravimetric) of concrete) -
ANSWER- C231/C231M, C29/C29M
The concrete sample must be obtained in accodance with what ASTM
method? (C138/C138M - 17a, Density (unit weight), yields, and air
content (gravimetric) of concrete) - ANSWER- C172/C172M
What method of consolidation must be used when the slump is greater
than 75 mm (3 in) (C138/C138M - 17a, Density (unit weight), yields,
and air content (gravimetric) of concrete) - ANSWER- Rodding
What method of consolidation must be used when the slump is less than
1 in. (25 mm]? (C138/C138M - 17a, Density (unit weight), yields, and
air content (gravimetric) of concrete) - ANSWER- Vibration
If rodding is the method of consolidation being used, the measure must
be filled in how many layers? (C138/C138M - 17a, Density (unit
weight), yields, and air content (gravimetric) of concrete) - ANSWER- 3
For a measure of 0.5 ft^3 [14 L], what is the required number of strokes
of the tamping rod for consolidation of each layer? (C138/C138M - 17a,
Density (unit weight), yields, and air content (gravimetric) of concrete) -
ANSWER- 25
When rodding the middle and the top layers, the tamping rod should
penetrate into the layer below approximately ___. (C138/C138M - 17a,
Density (unit weight), yields, and air content (gravimetric) of concrete) -
ANSWER- 25 mm (1 in)
If vibration is the method of consolidation, the measure must be filled in
_____ approximately equal layers. (C138/C138M - 17a, Density (unit
weight), yields, and air content (gravimetric) of concrete) - ANSWER- 2
Category | Exams and Certifications |
Comments | 0 |
Rating | |
Sales | 0 |