Mechanical Comprehension
Study online at https://quizlet.com/_5pp1bm
1. Four weights are tied together and hung from
the ceiling. What will be the tension in the cord
at the point labeled x?
60 lb
2. A series of four gears (W,X,Y,Z) is driven by
pulley V and a belt-if V turns in the direction
shown,which gears will rotate clockwise?
y, w
3. The illustration shows a water tank that is made
of wood planks and reinforced metal hoops.
Why are the hoops closer together near the
bottom of the tank?
The water pressure pushing against the sides of
the tank is greater near
the bottom
4. A box sits on a smooth table.Three strings are
attached to the box,each having a weight of 10
lbs attached to the other end. The box will move
in direction?
A
5. A spring will compress one inch for every 50
pounds of force that is applied to it.How much
force is needed to compress the same spring
10 inches?
500 lbs
6. Which gears will turn in the same direction as
A?
2 and 3
7. When these objects are placed on soft
sand,which one will sink the deepest into the
sand?
Triangle facing down
8. A belt passes over a drum and its ends are
connected to springs,if the drum rotates in the
direction shown and there is friction between
the drum and the belt,then?
spring 1 will get shorter
and spring 2 longer.
9. Spaces are placed between slabs of concrete in
city sidewalks to?
Allow for expansion and
contraction
10. Is it true that frictional forces Only operate in vertical directions
1 / 2
Mechanical Comprehension
Study online at https://quizlet.com/_5pp1bm
11. As part A moves to the left, gear C will turn first in direction 1 and
then in direction 2
12. A spring is compressed against a wall by a
wooden block that has a force applied to it. If
the force is removed from the block..
The block of wood will
move to the right
13. This drive pulley always turn Faster than pulley A or C
but not pulley B
14. This illustration shows an example of an inclined plane
Category | exam bundles |
Comments | 0 |
Rating | |
Sales | 0 |